Synergy Boreholes work with several manufacturers and installers of quality heat pumps.

However, we are financially independent, we do not take commission or payment from any manufacturer or installer.

Therefore we are free to obtain several competing quotes for your installation. It is then up to you to choose!

Click on the manufacturers name to go to their website

Dimplex has one of the widest ranges of heat pumps to suit applications between 5 - 130 Kw, e.g.

SI MEK range

Features

• Model range:
• SI 11 MEK – 11kW, single phase
• SI 16 MEK – 16kW, single phase
• Variable heating water flow temperatures from 35ºC to 58ºC, weather compensated.
• Integrated system components, including circulating pump, expansion vessels and safety assemblies for both the heating and ground collector circuits.
• Integrated WPM 2007 heat pump manager with removable control panel.
• Suitable for use with underfloor heating, radiator systems and to provide domestic hot water.
• Scroll compressor providing efficient, low noise running.
• Matching built-under 100L buffer tank for space saving and 400L domestic hot water cylinder.
• Single phase electrical connection with electronic soft start to reduce starting current loads.
• CoP: 4.2 - 4.3
• Heat output and coefficient of performance data measured at operating condition B0/W35
  

KENSA

The Compact range has been specifically designed for domestic applications. These are split into single (smaller) and twin (larger) compressor heat pumps, and unlike other manufacturers, incorporate the ground and underfloor circulation pumps, high specification acoustic hoods and double vibration isolation to reduce noise and vibration issues.
Compact heat pumps are designed for location in utility, plant rooms, or at the back of a garage, ideally away from any noise sensitive areas.
The Compact Heat Pump range is the most complete range of ground source heat pumps that will operate on single or three phase power supplies and can provide both space heating and domestic hot water.

The Plantroom range is designed for professional installation in larger buildings and for commercial projects. They are built as individual modules, which slot together to form higher outputs giving a greater flexibility to match the heat pump output to the heat load.

They are ideally suited for communal systems where they can be used to generate heat for a number of dwellings.

NIBE produces 15 different types of ground source heat pumps, ranging from 5 kW to 40 kW. By using a cascade connection it is possible to achieve an output of 360 kW.

The energy consumption for heating and hot water can be lowered by up to 75% with a ground source heat pump from NIBE in comparison to heating systems using fossil fuels.

e.g.

NIBE FIGHTER 1140 is a ground source heat pump for heating single and multi-family houses and industrial buildings.

NIBE FIGHTER 1140 has been equipped with a control panel that offers plenty of functions.

The new features are:

• Large control panel with clear symbols
• The easily understandable controls simplify the control and operation of the heat pump
• Double heat curves
• Programmable for climate and cooling control
• Clock
• Timer for temperature control
• Timer for hot water function
• Prepared for GSM- and Internet-integration
• Control unit for swimming pools
• Alarm logbook
• Choice of language
• Soft start relays
• Prepared for the configuration of four different installation systems
• Display of the refrigerant temperature
  

Viessman believe that energy-conscious building starts with a good design. Innovative construction technology and architecture therefore bank on low energy houses and the utilisation of renewable forms of energy. The Vitocal 222-G Compact Energy Tower provides the complete solution for low energy houses: Equipped with brine/water heat pump and a DHW cylinder. As a fully competent energy source, Vitocal 222-G provides convenient and reliable DHW and central heating and saves space too: The tower only has a footprint of 600 x 677 mm.

• Compact Energy Tower – the complete solution for new build: With heat pump and DHW cylinder.
• Complete brine/water heat pump, 6.4 to 9.6 kW
• Integral 250 l DHW cylinder
• Requires a space of only 600 x 677 mm, but no side clearances for service
• Can cover any heating requirement all the year round
• Quiet operation through hermetically sealed Compliant scroll compressor and sound insulation
• Menu-guided heat pump control unit for weather-compensated heating operation and natural cooling.

Worcester is a member of the multinational Bosch group.

Worcester offer a series of eight ground source heat pumps - 4 system and 4 combi - each of which are intended to provide all the heating and hot water requirements of the home. A ground source heat pump extracts stored solar energy from the ground, reducing the requirement to purchase fossil fuels.

Features, e.g. GREENSTORE 9

• Easy to operate text display menu
• Excellent Coefficient of Performance ratings give a better return on investment
• Quiet operation with low noise output
• Integrated additional heater avoids the need for a supplementary heat source
• Scroll compressor generates a flow temperature of up to 65°C
• 2 years parts and labour warranty for peace of mind
• No gas or oil required and no fluing allows easy siting of appliance
• No annual servicing required – reduced operating costs

Danfoss DHP-H produces lots of hot water at a low cost

Danfoss DHP-H is a very highly regarded heat pump. The reason is that it is extremely efficient and reliable. Our specially developed and patent pending TWS technology gives both more and hotter water considerably faster than old technology. It has an extra large hot water tank - 180 l. The time it takes to refill the hot water tank after peak consumption has more than halved. In addition, it can produce - if you require it - higher temperatures for the heating system.

Heating cost can be reduced by more than 50 percent

Danfoss DHP-H is so effective that the heating cost in a house can be reduced by more than 50 percent. It also has Danfoss' specially developed scroll compressor. This makes it a really efficient heat pump and contributes to operational reliability and quiet running. Danfoss DHP-H is very user friendly and easy to maintain. It is available in five outputs and has an integrated electrical heating element with three power stages as a back up heater.

Although we endeavour to provide relative and informative sites that we feel may be of interest to you, Synergy Boreholes and Systems Ltd. are not responsible for content found on these internet sites.

Our apologies for the repeated use of water boreholes and geothermal boreholes on these pages, such are the dictates of search engine requirements. 

Back to Geothermal Boreholes